Awareness · CPD · Professional Development

Permit to Work, Risk Assessment& Toolbox Talk Awareness Certificate

Control the hazard. Manage the risk. Brief the team. Work safely.

8 modules · 24 lessons · LOTO · Hot work · SIMOPS · Final assessment

8 modules · 24 individual lessons
3 MCQs per lesson
30-question final assessment
~6 hours study time
80% pass mark required
12 months access

Important — Course Status

This course is provided for professional awareness and educational development. It supports safer maritime practice but does not replace the vessel's Safety Management System, company procedures, statutory requirements, flag State instructions, port requirements, manufacturer guidance, risk assessments, permits to work, or instructions from the Master/responsible person. Learners must always follow the current onboard procedures and applicable law.

Course Purpose

Most serious injuries and fatalities at sea occur during maintenance and non-routine work — not during the normal operation of the vessel. This course builds practical awareness of the systems designed to prevent those incidents: the risk assessment, the permit to work, and the toolbox talk. Together they form the foundation of any effective shipboard safety management system.

Who This Course Is For

  • Deck crew and engine room personnel
  • Officers of the watch and chief officers
  • Bosuns, petty officers and maintenance crew
  • Contractor supervisors and permit issuers
  • Safety officers and marine managers
  • Anyone who issues, receives or works under a permit to work

What You'll Receive

  • 8 practical modules, 24 individual lessons
  • 3 MCQs per lesson — knowledge check as you go
  • 30-question scenario-based final assessment (80% pass mark)
  • Permit to Work, Risk Assessment & Toolbox Talk Awareness Certificate
  • 12 months access from course start
  • Covers PTW, LOTO, hot work, working aloft, SIMOPS and more
Permit to Work
Risk Assessment
Toolbox Talks
LOTO
Hot Work
Working Aloft
SIMOPS
Energy Isolation
Dynamic Risk
Supervisor Duties
Shift Handover
Stop-Work Authority

Course Curriculum — 8 Modules, 24 Lessons

1

Why Work Control Matters at Sea

1. The Difference Between Routine and Controlled Work2. What Can Go Wrong Without Control3. Safety Culture and Stop-Work
2

Risk Assessment in Practice

1. Hazard, Risk and Control2. Task-Based Risk Assessment3. Making Risk Assessments Useful
3

Dynamic Risk and Situational Awareness

1. Recognising Change During the Job2. Pause, Reassess and Restart3. Near Misses and Positive Intervention
4

The Permit to Work System

1. What a Permit Actually Does2. Permit Lifecycle3. Permit Conflicts and SIMOPS
5

Toolbox Talks

1. Purpose of a Toolbox Talk2. How to Lead a Good Toolbox Talk3. Common Toolbox Talk Failures
6

Isolation and Energy Control

1. Types of Energy on Board2. Lock-Out, Tag-Out and Try-Out3. Reinstatement and Handback
7

High-Risk Work Types

1. Hot Work and Fire Risk2. Working Aloft, Overside and Over Water3. Electrical, Pressure and Machinery Work
8

Supervision, Handover and Continuous Improvement

1. The Supervisor's Role2. Shift Handover and Suspended Work3. Records, Learning and Improvement

Assessment Structure

3
MCQs per lesson
Knowledge check as you learn
30
Final assessment questions
80% pass required for certificate
CPD
Awareness Certificate
Not MCA/STCW approved

Ready to Start?

One-off payment · 12 months access · Instant start · Certificate on completion

This course is provided for professional awareness and educational development. It supports safer maritime practice but does not replace the vessel's Safety Management System, company procedures, statutory requirements, flag State instructions, port requirements, manufacturer guidance, risk assessments, permits to work, or instructions from the Master/responsible person. Learners must always follow the current onboard procedures and applicable law.

Cookie Preferences

We use strictly necessary cookies to keep the platform working and optional analytics cookies to help us improve it. Cookie Policy